4 flame colors

23″ Infrared Electric Fireplace Insert with 4 Flame Colors (1,500 W)

$323.99

  • 23" insert
  • 4 flame colors
  • 1,500 W infrared

This realistic electric fireplace insert is a 23-inch infrared firebox with a log set, tiled surround and 4 flame colors, made to replace inserts in furniture or set into a wall, and it heats rooms up to 400 sq ft.

  • Tune the fire: 4 flame colors and 5 brightness levels
  • Comfortable heat: 1,500 W infrared quartz heater
  • Upgrade an old console: made to replace inserts in many 2000 to 2020 consoles

In stock

Add to Cart
23 inch infrared electric fireplace insert with log set, tiled surround and colored 3D flame
23" Infrared Electric Fireplace Insert with 4 Flame Colors (1,500 W)
$323.99

Free shipping to the lower 48 states. Ships from a US warehouse.

Not sure it fits? How to measure for an insert or ask us.

Pairs well with

Total

Overview

This is our most adjustable 23-inch insert, and a realistic electric fireplace insert for people who care about how the fire looks. You get a 3D flame over a log set, a faux tile surround, 4 flame colors, 3 flame speeds and 5 brightness levels, all backed by a 1,500 W infrared quartz heater.

It’s made as a replacement for the insert in many fireplace consoles bought between 2000 and 2020, so it can be a real upgrade over a plain stock insert. Sizes vary, so check your opening first. If you only need the basics, our 23″ replacement insert costs less to buy and run. Browse all our electric fireplace inserts.

Will it fit your fireplace?

It’s a 23-inch insert for furniture and wall openings sized for that. The insert measures 24.1 x 8.2 x 20.2 in (W x D x H). It’s deeper than our thin inserts, so depth is the measurement to check first. The manual shows at least 1 inch of space around the body, with 1.5 inches on the top or on one side.

If you’re replacing an old insert, measure both the old unit and the opening. Our guide on how to measure for an electric fireplace insert walks you through it, and we’ll check your numbers before you order.

Heat and running cost

On high the heater draws 1,500 W on 120 V, about 5,118 BTU per hour (often rounded to 5,000 BTU), rated for supplemental heat up to 400 sq ft. At about 17¢ per kWh, that’s roughly 26¢ an hour. No low-heat wattage is listed, so we can’t quote a low-setting cost.

Infrared quartz is what separates this from our 1,400 W thin inserts. Flame-only mode runs just the LED flame with the heater off. More in our guide to how much electricity an electric fireplace uses.

Controls and features

The infrared remote and the touch buttons with a digital display at the top right control power, heat, temperature (11 settings plus an On setting), the 4 flame colors, 3 flame speeds, 5 brightness levels for the flame and ember bed, and the 1 to 9 hour timer. The panel sits high so pets are less likely to bump it. There’s no app or sound.

Installation

You can recess it in a wall, set it into furniture, or use it freestanding. In a mantel it slides in from the back, so you need access behind it and a helper. It plugs into a grounded 120 V outlet with a 6 ft three-prong cord that exits at the rear; don’t use an extension cord. It isn’t described for use inside an open masonry fireplace. Our guide on how to install an electric fireplace insert covers the steps.

Specifications

Fits opening Furniture or wall openings made for a 23-inch insert
Dimensions (W x D x H) 24.1 x 8.2 x 20.2 in
Heater output 1,500 W infrared quartz, about 5,118 BTU/hr
Power 120 V plug-in, 6 ft three-prong cord
Heating area Up to 400 sq ft, supplemental
Flame effects 3D flame, log set, 4 flame colors, 3 flame speeds, 5 brightness levels, flame without heat
Controls Infrared remote, touch buttons with digital display, 1 to 9 hr timer, 64 to 82°F
Safety features Overheat cutoff and a fuse; the manufacturer lists CSA/UL certification
Material Tempered glass, powder-coated sheet metal; antique black
Weight 27.8 lb

Good to know

  • Best for: upgrading the insert in an older fireplace console with a 23-inch opening.
  • Best for: anyone who wants to change the flame color.
  • Not for: very shallow cabinets; it’s 8.2 inches deep.

FAQ

What flame colors does it have?

There are 4 flame colors you cycle through with the flame button, but the manual doesn’t name them. Ask us and we’ll check before you order.

Will it replace the insert in my older fireplace TV stand?

It’s made as a replacement for many consoles bought between 2000 and 2020, but sizes vary. Compare your opening with the 24.1 x 8.2 x 20.2 in insert, or send us your measurements to be sure.

How much does it cost to run?

About 26¢ an hour on high at about 17¢ per kWh.

Can I just use the flame?

Yes. The 3D flame works with or without heat.

Shipping, returns & warranty

Shipping is free to the lower 48 US states. Your order ships from a US warehouse and you get tracking by email once it leaves.

You can cancel for a refund until your order ships, within 30 days of placing it. If it arrives damaged or defective, we replace or refund it within 90 days of delivery.

Every product has a 3-year warranty against quality defects. In the first year we replace a defective unit with a brand-new one for free. In years two and three we send a new unit and you pay the shipping.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.