Overview
This 48 inch curved electric fireplace swaps the usual flat glass for a gently bowed front, so the flame reads from more angles in the room. Hang it on the wall, or attach the included base legs and set it on a console or table.
You can choose logs, crystals or pebbles as the fuel bed, then set 4 flame colors, 8 ember bed colors and a 4-setting backlight. The 1,400 W heater is rated for supplemental heat up to 400 sq ft. See more wall-mounted and recessed electric fireplaces if you need a recessed model.
Why you’ll like it
- Curved glass front. A softer, modern shape that stands out from flat panels.
- Three fuel beds. Switch between log, crystal and pebble looks.
- Color control. 4 flame colors, 8 ember colors and 3 flame brightness levels.
- Backlight. 3 solid colors plus 1 cycling mode for a wash of light on the wall.
- Wall or tabletop. Base legs are included for a freestanding setup.
Will it fit?
On the wall, it measures 48 inches wide, 18 1/8 inches high and about 5 inches deep. With the feet on, it stands 20 7/8 inches high and 10 7/8 inches deep. It weighs about 34 lb. Measure your wall or table, and contact us if you have questions about the fit.
Because the front curves outward, it will stand off the wall a little more at the center than a flat model of the same width.
Heat and running cost
The heater draws 1,400 W, which works out to about 4,777 BTU per hour, and the manufacturer rates it as supplemental heat for rooms up to 400 sq ft. On high it costs about 24¢ an hour at about 17¢ per kWh.
The flame and backlight run without heat too, so you can use it as a light feature in summer. Want the full math for your rate? See how much electricity an electric fireplace uses.
Controls and features
- Infrared remote control
- Touch buttons with a digital display in the top right corner
- 11 temperature settings, 64 to 82°F
- Timer, 1 to 8 hours
- 4 flame colors, 8 ember bed colors, 3 brightness levels
- 4 backlight settings (3 colors and 1 cycle)
- Log, crystal and pebble burning modes
Installation
Two setups: wall-mounted, or on a tabletop with the base legs included in the box. This model is not designed for recessing into a wall; if you want a flush look, see our guide to wall-mounted vs recessed electric fireplaces.
It plugs in. It runs on a standard 120 V grounded outlet and draws 12 A, so it needs a 15 A circuit. A dedicated circuit is best if other appliances share the line. Plug it straight into the wall, never into an extension cord or power strip.
Specifications
| Size class | 48 inch, curved front |
|---|---|
| Dimensions (W x D x H) | 48 x 5 x 18.1 in; 48 x 10.9 x 20.9 in with feet |
| Weight | About 34 lb |
| Installation | Wall-mounted or tabletop (legs included) |
| Power | 120 V plug-in, 12 A |
| Heater | 1,400 W |
| Heat output | About 4,777 BTU per hour |
| Heating area | Up to 400 sq ft (supplemental) |
| Thermostat | 11 settings, 64 to 82°F |
| Timer | 1 to 8 hours |
| Flame / ember colors | 4 / 8 |
| Backlight | 4 settings (3 colors, 1 cycle) |
| Fuel bed options | Logs, crystals, pebbles |
| Controls | Remote, touch panel with digital display |
| Safety | Overheat cut-off and fuse |
| Certification | CSA/UL listed by the manufacturer |
| Finish | Antique black, powder coated |
Good to know
- Best for: modern living rooms and bedrooms where you want the fireplace to be the focal point.
- Best for: renters, since it can sit on a table with the included legs.
- Not for: a flush, recessed install.
- Not for: tight hallways where a curved front might get bumped.
FAQ
Can I recess this curved fireplace into the wall?
No. It’s made for wall mounting or tabletop use with the included legs. For a flush install, choose one of our recessed models.
What’s the backlight for?
It throws colored light onto the wall around the unit. You get 3 solid colors and 1 cycling mode, and you can use it with or without the flame and heat.
Can I change the fuel bed?
Yes. It offers three burning modes, logs, crystals and pebbles, so you can match the look to your room.
How long will the timer run?
You can set it from 1 to 8 hours. For overnight use, read our notes on leaving an electric fireplace on overnight.



Reviews
There are no reviews yet.