Overview
This ultra thin electric fireplace insert is a 23-inch model for consoles and cabinets where depth is the problem. The insert is just 5 inches deep, and it still carries a log set, 4 flame brightness levels and a 1,400 W heater.
If your fireplace TV stand has a 23-inch opening but not much room behind it, start here. For a bigger opening, the same thin design comes in 26″, 28″ and 33″ widths. See them all in our electric fireplace inserts.
Why you’ll like it
- Thin body. Just 5 inches deep.
- Log set and LED flame. 4 brightness levels, and the flame runs without heat.
- 11 temperature settings. 64 to 82°F, plus an On setting for steady heat.
- Auto shutoff timer. Pick anywhere from 1 to 8 hours.
- Safety built in. Overheat cutoff and a fuse; the manufacturer lists CSA/UL certification.
Will it fit your fireplace?
It’s built for openings made for a 23-inch insert. The insert measures 24 x 5 x 19.9 in (W x D x H). That’s about 2.5 in taller than our other 23-inch thin insert, so if your opening is tight on height, check it first. The manual shows at least 1 inch of space around the body, with 1.5 inches on the top or on one side.
Measure the width, height and depth of your opening at the narrowest points. Our guide on how to measure for an electric fireplace insert shows where to put the tape.
Heat and running cost
On high the heater draws 1,400 W on 120 V, about 4,777 BTU per hour (often rounded up to 5,000 BTU), rated for supplemental heat up to 400 sq ft. At about 17¢ per kWh, that’s roughly 24¢ an hour. No low-heat wattage is listed, so we can’t quote a low-setting cost.
Flame-only mode runs just the LED flame with the heater off. More in our guide to how much electricity an electric fireplace uses.
Controls and features
The infrared remote and the buttons at the top right of the glass handle power, heat, temperature, the 4 flame brightness levels and the 1 to 8 hour timer. The remote works up to about 19 ft away, and the panel can lock the heater. The LEDs are rated for 50,000 hours. There’s no app, sound or flame-color setting.
Installation
It’s made for TV stands, fireplace cabinets and freestanding use. In a mantel it goes in from the back, so you need access behind it and a helper to lift it. It plugs into a grounded 120 V outlet with a 6 ft three-prong cord; don’t use an extension cord. It isn’t described for a masonry wood fireplace; our 21″ electric log insert is made for that job. More help in our guide on how to install an electric fireplace insert.
Specifications
| Fits opening | Furniture made for a 23-inch insert |
|---|---|
| Dimensions (W x D x H) | 24 x 5 x 19.9 in |
| Heater output | 1,400 W, about 4,777 BTU/hr |
| Power | 120 V plug-in, 6 ft three-prong cord |
| Heating area | Up to 400 sq ft, supplemental |
| Flame effects | Log set, 4 brightness levels, flame without heat |
| Controls | Infrared remote, buttons on the glass, 1 to 8 hr timer, 64 to 82°F |
| Safety features | Overheat cutoff and a fuse; the manufacturer lists CSA/UL certification |
| Material | Tempered glass, sheet metal, plastic; antique black |
| Weight | 18.1 lb |
Good to know
- Best for: shallow media consoles and cabinets with a 23-inch opening.
- Best for: bedrooms and living rooms up to 400 sq ft.
- Not for: sitting loose inside an open wood fireplace.
FAQ
How thin is it?
The insert is 5 inches deep. Leave a little extra room behind it for the cord.
Is this the same as your other 23-inch ultra-thin insert?
On paper the heater, controls and flame are the same as our 23″ log set insert. This one is taller, 19.9 in versus 17.4 in, and lists plastic among its materials, which may mean a different trim. Ask us and we’ll compare the two for your opening.
What does it cost to run on high?
About 24¢ an hour at about 17¢ per kWh.
Can I turn the heat off in summer?
Yes. The flame runs on its own whenever you like.


Reviews
There are no reviews yet.