Ember glow on its own

26″ Ultra-Thin Electric Fireplace Insert with Log Set and Remote (1,400 W)

$203.99

  • 26" insert
  • 1,400 W heat
  • Ember-only glow

This 26 inch electric fireplace insert is a thin log-set firebox for TV stands, cabinets and mantels made around a 26-inch insert, and it adds supplemental heat to rooms up to 400 sq ft.

  • A wider flame: about 3 in more face width than our 23-inch
  • Set the mood: 4 flame brightness levels, with or without heat
  • Thin enough for consoles: just 4.9 in deep

In stock

Add to Cart
26 inch ultra-thin electric fireplace insert with log set and glowing ember bed in an antique black frame
26" Ultra-Thin Electric Fireplace Insert with Log Set and Remote (1,400 W)
$203.99

Free shipping to the lower 48 states. Ships from a US warehouse.

Not sure it fits? How to measure for an insert or ask us.

Pairs well with

Total

Overview

This 26 inch electric fireplace insert is a step up in flame width from the common 23-inch size, with the same thin build. It has a log set and 4 flame brightness levels, plus a 1,400 W heater for rooms up to 400 sq ft.

It’s 3.3 in wider than our 23″ log set insert but the same depth and height, so it’s the natural pick for a 26-inch opening. Bigger openings can look at the 28″ or 33″, all in our electric fireplace inserts.

Will it fit your fireplace?

It’s sized for furniture and openings built for a 26-inch insert. The insert measures 27.2 x 4.9 x 17.4 in (W x D x H). The manual shows at least 1 inch of space around the body, with 1.5 inches on the top or on one side.

Measure the opening’s width, height and depth at the tightest points and leave space for the cord. Our guide on how to measure for an electric fireplace insert covers it step by step, and we’re happy to check your numbers before you buy.

Heat and running cost

On high the heater draws 1,400 W on 120 V, about 4,777 BTU per hour (often rounded up to 5,000 BTU), rated for supplemental heat up to 400 sq ft. At about 17¢ per kWh, that’s roughly 24¢ an hour. No low-heat wattage is listed, so we can’t quote a low-setting cost.

A wider insert doesn’t mean more heat: this one uses the same 1,400 W heater as our 23-inch models, so you’re choosing it for flame size and fit. Flame-only mode runs just the LED flame with the heater off. More in our guide to how much electricity an electric fireplace uses.

Controls and features

The infrared remote and the buttons at the top right of the glass control power, heat, temperature, the 4 brightness levels and the 1 to 8 hour timer. The remote works up to 19 ft away, and the panel can lock the heater. The LEDs are rated for 50,000 hours. There’s no app, sound or flame-color setting.

Installation

It’s made for TV stands, fireplace cabinets and freestanding use, so double-check the furniture opening against the size above. In a mantel it slides in from the back, so you need access behind it and a helper. It plugs into a grounded 120 V outlet with a 6 ft three-prong cord that exits on the right; don’t use an extension cord. It isn’t described for an open wood fireplace. See our guide on how to install an electric fireplace insert for setup tips.

Specifications

Fits opening Furniture made for a 26-inch insert
Dimensions (W x D x H) 27.2 x 4.9 x 17.4 in
Heater output 1,400 W, about 4,777 BTU/hr
Power 120 V plug-in, 6 ft three-prong cord
Heating area Up to 400 sq ft, supplemental
Flame effects Log set, 4 brightness levels, flame without heat
Controls Infrared remote, buttons on the glass, 1 to 8 hr timer, 64 to 82°F
Safety features Overheat cutoff and a fuse; the manufacturer lists CSA/UL certification
Material Tempered glass, powder-coated sheet metal; antique black
Weight 18.3 lb

Good to know

  • Best for: consoles and mantels with a 26-inch insert opening.
  • Best for: shallow furniture; it’s under 5 inches deep.
  • Not for: heating a big open-plan room on its own.

FAQ

Can I run only the embers?

Not as a separate setting. The flame has 4 brightness levels and an off position. With the flame off and the heat on, the ember bed glows softly to show the heater is running.

Does the 26-inch heat more than the 23-inch?

No. Both use a 1,400 W heater rated for up to 400 sq ft. The difference is flame width and fit.

What’s the running cost?

About 24¢ an hour on high at about 17¢ per kWh.

Will it fit my 26-inch TV stand?

It’s made for 26-inch openings, and the insert is 27.2 x 4.9 x 17.4 in. Send us your measurements and we’ll check the fit.

Shipping, returns & warranty

Shipping is free to the lower 48 US states. Your order ships from a US warehouse and you get tracking by email once it leaves.

You can cancel for a refund until your order ships, within 30 days of placing it. If it arrives damaged or defective, we replace or refund it within 90 days of delivery.

Every product has a 3-year warranty against quality defects. In the first year we replace a defective unit with a brand-new one for free. In years two and three we send a new unit and you pay the shipping.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.