Overview
If the insert in your fireplace TV stand or mantel has quit, this 23 inch electric fireplace insert replacement is the one the supplier sells for furniture bought between 2000 and 2020. You keep the cabinet you like and swap in a new firebox with a log set, LED flame and a 1,400 W heater.
It can also be recessed into a wall or used freestanding. Compare other sizes in our electric fireplace inserts, or see our 23″ infrared insert with 4 flame colors if you’d like a bigger upgrade.
Why you’ll like it
- Made as a replacement. The supplier targets furniture bought from 2000 to 2020.
- Three ways to install. Recessed in a wall, set into furniture or freestanding.
- 4 flame brightness levels. The flame runs with or without heat.
- 11 heat settings, 64 to 82°F. Plus an On setting that keeps the heater going.
- Two safety cutoffs. An overheat cutoff and a fuse; the manufacturer lists CSA/UL certification.
Will it fit your fireplace?
Pull your old insert and measure it, plus the opening it came out of. The 2000 to 2020 range is the supplier’s guide, not a promise for every model, so the numbers matter more than the year. The supplier only lists the shipping carton: 28.15 x 7.56 x 22.91 in (W x D x H), so the insert is smaller than that in every direction.
Send us your opening’s width, height and depth and we’ll check the fit before you order. Our guide on how to measure for an electric fireplace insert shows exactly what to measure.
Heat and running cost
On high the heater draws 1,400 W, about 4,777 BTU per hour (the supplier rounds this up to 5,000 BTU), rated for supplemental heat up to 400 sq ft. At about 17¢ per kWh, that’s roughly 24¢ an hour. No low-heat wattage is listed, so we can’t quote a low-setting cost.
Flame-only mode runs just the LED flame with the heater off. More in our guide to how much electricity an electric fireplace uses.
Controls and features
Use the infrared remote from the couch, or the buttons at the top right of the glass. Both cover power, heat, the 11 temperature settings, 4 flame brightness levels and the 1 to 8 hour timer. The listing doesn’t mention flame colors, sound or app control.
Installation
The supplier lists three setups: recessed in a wall, set into furniture (check the furniture size first), or freestanding. The listing doesn’t say whether it plugs in or hardwires, so we’ll confirm the power connection before you order. It isn’t described for use inside an open wood fireplace. Our guide on how to install an electric fireplace insert covers the steps.
Specifications
| Fits opening | Furniture or wall openings made for a 23-inch insert |
|---|---|
| Shipping carton | 28.15 x 7.56 x 22.91 in (W x D x H) |
| Heater output | 1,400 W, about 4,777 BTU/hr |
| Heating area | Up to 400 sq ft, supplemental |
| Flame effects | Log set, 4 brightness levels, flame without heat |
| Controls | Infrared remote, buttons on the glass, 1 to 8 hr timer, 64 to 82°F |
| Safety features | Overheat cutoff and a fuse; the manufacturer lists CSA/UL certification |
| Material | Tempered glass, powder-coated sheet metal; antique black |
| Weight | 22.1 lb (shipping) |
Good to know
- Best for: bringing a 2000 to 2020 fireplace console or mantel back to life.
- Best for: recessed wall installs where you want a log-set look.
- Not for: open masonry fireplaces.
FAQ
Will it fit the fireplace console I bought in 2012?
The supplier sells it for furniture from 2000 to 2020, but sizes vary by brand. Measure the old insert and the opening and send us the numbers; we’ll confirm before you order.
Can I recess it into a wall?
Yes. The supplier lists recessed wall installs, as well as furniture and freestanding use.
How much heat does it give?
1,400 W, about 4,777 BTU per hour, rated for supplemental heat up to 400 sq ft.
What happens if it overheats?
An overheat cutoff shuts the heater down, and a fuse adds a second layer of protection.




Reviews
There are no reviews yet.