Overview
This white electric fireplace with mantel is a 44 inch freestanding surround with carved detail, a stone-textured top and a 23 inch electric insert. Plug it into a standard outlet and you have a focal point with real supplemental heat for rooms up to 400 sq ft.
The flame runs with or without heat and has 4 brightness settings. The white lacquer finish makes a bright backdrop for holiday decor on the top. Compare it with our other electric fireplaces with mantel.
Why you’ll like it
- Bright white mantel. Lacquered Jasmine White finish with three-dimensional carved patterns.
- Stone-textured top. Room for frames, candles and seasonal decor.
- Real heat. 1,400 W with 11 settings from 64 to 82°F.
- Flame-only mode. 4 brightness levels, with or without heat.
- Safety basics. The manufacturer lists CSA/UL certification, plus overheat protection and a fuse.
Will it fit?
Assembled, the mantel measures 44 x 13.75 x 38 inches (W x D x H) and weighs about 34 lb. It holds a 23 inch insert. Leave a little space on each side, and contact us if you have questions about your room.
We don’t have a published TV size or top weight limit for this mantel, so we don’t recommend setting a TV on it.
Heat and running cost
The heater draws 1,400 W, which works out to about 4,777 BTU per hour, and the manufacturer rates it as supplemental heat for rooms up to 400 sq ft. On high it costs about 24¢ an hour at about 17¢ per kWh.
The flame works without heat, so it can be a light feature through the summer. Want the full math for your rate? See how much electricity an electric fireplace uses.
Controls and features
- Infrared remote control
- 11 temperature settings, 64 to 82°F
- Timer, 1 to 8 hours
- Flame with 4 brightness settings
- LED light source rated by the manufacturer for 50,000 hours
- Overheat protection and fuse
Installation
Freestanding mantel with a replaceable insert. The manufacturer calls installation extremely simple: assemble the surround, slide the insert in from the back and plug it into a standard 120 V outlet. The insert has a 6 ft cord on the right side, and L-brackets and screws are included to secure it to the mantel. No vent, chimney or wiring, and it’s easy to move to another room later.
Specifications
| Dimensions (W x D x H) | 44 x 13.75 x 38 in |
|---|---|
| Weight | About 34 lb |
| Insert size class | 23 inch |
| Installation | Freestanding, plug-in |
| Heater | 1,400 W, 120 V |
| Heat output | About 4,777 BTU per hour |
| Heating area | Up to 400 sq ft (supplemental) |
| Thermostat | 11 settings, 64 to 82°F |
| Timer | 1 to 8 hours |
| Flame brightness | 4 levels |
| Controls | Remote control (up to 19 ft), control panel |
| Cord | 6 ft |
| Certification | CSA/UL listed by the manufacturer |
| Venting | Vent-free |
| Materials | Wood, stainless steel, glass |
| Finish | Jasmine White |
Good to know
- Best for: bright, Scandinavian or coastal rooms where a dark mantel would feel heavy.
- Best for: living rooms and bedrooms up to about 400 sq ft that need extra warmth.
- Not for: holding a TV. Keep the top for decor.
- Not for: anyone wanting colored flames; this has a classic flame with brightness control.
FAQ
Is the white finish painted or wrapped?
The manufacturer describes a high-quality lacquer finish over carved panels, with a stone-textured countertop.
Can I move it to another room?
Yes. It’s freestanding and plugs into a standard outlet, so you can relocate it whenever you like.
Can I replace the insert later?
Yes. The 23 inch heater insert is replaceable without replacing the mantel.
Does it need a vent?
No. It’s a vent-free electric fireplace. See our guide to venting for more.


Reviews
There are no reviews yet.