Overview
This 36 inch wall mounted electric fireplace is sized for short walls: between two bedroom windows, above a desk, or in a home office. It measures 36 x 4.3 x 15.9 inches, weighs about 26 lb, and, unlike the 60 inch size, it can also stand on a tabletop.
Need more width? See the 42 inch version for a living room or the 60 inch model for a long media wall, or compare every option in our wall-mounted and recessed electric fireplace collection.
Why you’ll like it
- Small but complete. You get the same 1,400 W heater and color options as the larger sizes in a 36 inch frame.
- Three ways to place it. Hang it, build it into the wall, or screw on the four tabletop supports and set it on a dresser or console.
- Quick setup. Plan on 5 to 20 minutes of assembly.
Will it fit?
For a built-in install, frame a cut-out 33.6 inches wide, 15.8 inches high and 4.9 inches deep. The body that slides into it is 33.1 x 15.4 x 3.8 inches. The 36 inch front frame is wider than the hole, so it hides the edges.
Hung on the surface, it sticks out about 4.3 inches. Unsure about your wall? Send us a message before you start.
Heat and running cost
On full heat it uses 1,400 W, roughly 4,777 BTU per hour. It’s rated as supplemental heat for up to 400 sq ft. At about 17¢ per kWh it costs around 24¢ an hour. A 3 hour evening comes to about 71¢.
With the heater off, the flame alone costs much less to run. Our electric fireplace power cost guide lets you plug in your own rate.
Controls and features
- Touch panel in the top right corner that sleeps after 10 seconds
- IR remote (two AAA batteries, not included)
- Thermostat: ON or 64 to 82°F in 2 degree steps
- Heater lock: hold the heat button for 10 seconds
- Sleep timer from 1 to 9 hours
- Flame and ember bed each have 15 colors plus a rotating mode
- Display switches between °F and °C
Installation
It’s plug-in, 120 V, with a grounded 3-prong cord. Give it its own outlet, and don’t use an extension cord or power strip. The box holds the wall bracket, glass front, acrylic crystals, tabletop supports, two screw bags and the remote. You supply safety goggles, a Phillips screwdriver and a power drill.
For an in-wall install, keep at least a 1/4 inch gap at the top of the opening so the air intake can breathe. Torn between hanging it and building it in? Our guide to wall-mounted vs recessed fireplaces walks through both.
Specifications
| Dimensions (W x D x H) | 36 x 4.3 x 15.9 in |
|---|---|
| Wall opening (W x H x D) | 33.6 x 15.8 x 4.9 in |
| Recessed body (W x H x D) | 33.1 x 15.4 x 3.8 in |
| Weight | About 26 lb |
| Mounting | Surface, in-wall or tabletop |
| Power | Plug-in, 120 V, 60 Hz |
| Heater | 1,400 W, about 4,777 BTU/hr |
| Room size | Up to 400 sq ft, supplemental |
| Thermostat range | 64 to 82°F, 11 settings |
| Timer | 1 to 9 hours |
| Colors | 16 flame and 16 ember settings |
| Flame speed / brightness | 5 / 5 levels |
| Safety | Overheat cut-off and fuse |
| Certification | CSA/UL listed by the manufacturer |
| Finish | Antique black, powder coated |
Good to know
- Best for: bedrooms, offices and narrow walls between windows.
- Best for: renters who can’t cut drywall, since it also sits on a table.
- Not for: a large open room. For a long wall, look at the bigger sizes.
FAQ
What size hole do I cut for the 36 inch model?
33.6 inches wide by 15.8 inches high, with 4.9 inches of depth behind the drywall.
Can it sit on a dresser?
Yes. Four tabletop supports come in the box and screw to the bottom. Keep it on a hard, flat surface, not a bed or soft furniture.
Is it OK for a kid’s room or a room with pets?
Lock the heater from the touch panel and only the flame runs. Keep the remote with an adult.
Does it need a vent or chimney?
No. There’s no fuel to burn. You only need clear airflow at the top. Here is why electric fireplaces skip the chimney.



Reviews
There are no reviews yet.