Overview
This 44 inch recessed electric fireplace is made to sit inside a wall or a TV stand opening, so only the glass and trim show. It burns a log-style flame with 3 brightness levels, and the 1,400 W heater gives supplemental heat to rooms up to 400 sq ft.
You can run the flame with the heat off, set a timer from 1 to 9 hours and control it all from the remote or the touch buttons in the top right corner. Compare it with our other wall-mounted and recessed electric fireplaces.
Why you’ll like it
- Classic log flame. A traditional log look with 3 brightness levels.
- Built-in install. Recess it in a framed wall or set it into a TV stand cavity.
- Controls up high. The touch panel and digital display sit in the top right corner, out of easy reach of pets.
- Front panel comes off. The detachable front panel makes installation easier, and a step-by-step guide is included.
- Two safety cut-offs. Overheat protection plus a fuse, and the manufacturer lists CSA/UL certification.
Will it fit?
The fireplace measures 44 x 5 x 18.8 inches (W x D x H) and weighs about 42 lb. The back of the firebox is 41.2 inches wide and 18.6 inches high.
The manual calls for an opening 42.1 inches wide, 18.8 inches high and 5.1 inches deep. Measure your framed wall or TV stand opening against those numbers. If you’re unsure, contact us and we’ll help you check the fit.
Heat and running cost
The heater draws 1,400 W, which works out to about 4,777 BTU per hour, and the manufacturer rates it as supplemental heat for rooms up to 400 sq ft. On high it costs about 24¢ an hour at about 17¢ per kWh.
With the heater off, flame-only mode lets you enjoy the fire in any season. Want the full math for your rate? See how much electricity an electric fireplace uses.
Controls and features
- Infrared remote control
- Touch buttons with a digital display in the top right corner
- 11 temperature settings, 64 to 82°F
- Timer, 1 to 9 hours
- Log flame with 3 brightness levels
- LED light source rated by the manufacturer for 50,000 hours
Installation
This model is made for two setups: recessed into a wall, or installed in a TV stand opening. It comes with screws to secure it in the opening but no wall bracket, so it isn’t made to hang on a flat wall surface. The glass front lifts off for installation, and the step-by-step guide walks you through it.
It plugs in. A 6 ft, 3-wire grounded cord exits on the right side and runs on a standard 120 V outlet. Plan the install so you can reach a dedicated outlet without an extension cord. For help choosing a setup, read wall-mounted vs recessed electric fireplaces.
Specifications
| Size class | 44 inch |
|---|---|
| Dimensions (W x D x H) | 44 x 5 x 18.8 in |
| Wall opening (W x H x D) | 42.1 x 18.8 x 5.1 in |
| Weight | About 42 lb |
| Installation | Recessed in wall or in a TV stand |
| Power | 120 V plug-in, 6 ft cord |
| Heater | 1,400 W |
| Heat output | About 4,777 BTU per hour |
| Heating area | Up to 400 sq ft (supplemental) |
| Thermostat | 11 settings, 64 to 82°F |
| Timer | 1 to 9 hours |
| Flame | Log effect, 3 brightness levels |
| Controls | Remote, touch panel with digital display |
| Safety | Overheat cut-off and fuse |
| Certification | CSA/UL listed by the manufacturer |
| Venting | Vent-free |
| Materials | Sheet metal, tempered glass |
| Finish | Antique black, powder coated |
| In the box | Fireplace, remote, screws, manual |
Good to know
- Best for: a built-in wall or media wall where you want a traditional log look.
- Best for: refreshing a TV stand that already has a fireplace opening, if the size matches.
- Not for: hanging on a flat wall surface; it’s built to be recessed.
- Not for: people who want multi-color flames; this one is a classic log flame.
FAQ
Can I hang this 44 inch fireplace on the wall instead?
It’s made for recessed and TV stand installs and doesn’t include a wall bracket. For a hang-on-the-wall option, look at our wall-mounted models.
Will it fit my TV stand opening?
The manual calls for an opening 42.1 inches wide, 18.8 inches high and 5.1 inches deep. Measure your stand and send us the numbers if you’d like us to check them.
Does it need a vent?
No. It’s a vent-free electric fireplace with no chimney or fuel. More in our guide to venting.
Can the flame run without heat?
Yes. The flame works on its own, so you can use it as a light feature year-round.



Reviews
There are no reviews yet.