Overview
This 18 inch electric fireplace insert is the smallest in our range, made for compact stove cabinets, bedroom consoles and TV stands with a small opening. It’s only 5.15 in deep, and it still runs the same 1,400 W heater as our 23-inch models.
Behind the flame you get a log set in front of a brick-wall backdrop, so it looks like a little hearth. If your opening is 23 inches, our 23″ insert for TV stands uses the same controls in a wider body. Browse every size in our electric fireplace inserts.
Why you’ll like it
- Small and shallow. 18 x 17.1 x 5.15 in, light enough for one person to set in place.
- Brick-wall design. A classic backdrop behind the log set and flame.
- 1,400 W heater. Same output as most of our larger inserts.
- 20 temperature steps. From 62 to 82°F.
- Wide air outlet. The supplier says it spreads heat evenly and helps prevent overheating.
Will it fit your fireplace?
The supplier lists it at 18 x 5.15 x 17.1 in (W x D x H). Your opening should be at least 17.1 in high and 5.15 in deep, plus a little room behind for the cord. Check the width against the 18-inch size; it’s too small for a 23-inch opening.
Measure at the tightest points of the opening. Our guide on how to measure for an electric fireplace insert shows how, and we’ll double-check your numbers on request.
Heat and running cost
On high the heater draws 1,400 W, about 4,777 BTU per hour, rated for supplemental heat up to 400 sq ft. At about 17¢ per kWh, that’s roughly 24¢ an hour. No low-heat wattage is listed, so we can’t quote a low-setting cost.
The supplier lists 4,777 BTU, which matches the 1,400 W rating. Flame-only mode runs just the LED flame with the heater off. More in our guide to how much electricity an electric fireplace uses.
Controls and features
The remote turns it on or off with one touch, and the touch buttons and LED display on the unit cover heat, 20 temperature steps from 62 to 82°F, 3 flame intensities and a timer from 30 minutes to 6 hours. No app, sound or flame colors are listed.
Installation
It runs on 120V, 60Hz household power. The supplier describes it as easy to install and suited to different stove cabinets, so it’s meant to sit inside furniture or a small fireplace cabinet. It isn’t described for an open masonry fireplace. Our guide on how to install an electric fireplace insert covers the basics.
Specifications
| Dimensions | 18 x 17.1 x 5.15 in (W x H x D) |
|---|---|
| Fits opening | Small stove cabinets and TV stands sized for an 18-inch insert |
| Heater output | 1,400 W, 4,777 BTU/hr |
| Heating area | Up to 400 sq ft, supplemental |
| Voltage/plug | 120V, 60Hz |
| Flame effects | Log set, brick-wall backdrop, 3 flame intensities, flame without heat |
| Controls | Remote, touch buttons, LED display, 30 min to 6 hr timer, 62 to 82°F |
| Safety features | Built-in overheating protection |
| Material | Tempered glass, sheet metal, plastic; black |
| Weight | 14.3 lb (shipping) |
Good to know
- Best for: small cabinets, bedrooms and apartments.
- Best for: anyone short on depth; it’s only 5.15 in deep.
- Not for: 23-inch openings; it will leave a gap.
- Not for: open wood fireplaces.
FAQ
Is it really 18 inches?
Yes. The supplier’s spec lists 18 x 5.15 x 17.1 in. One line of its description mentions 23 inches, which we believe is a copy error from a sibling model; we’ll confirm if you need certainty.
Does a small insert give less heat?
No. It has a 1,400 W heater rated for supplemental heat up to 400 sq ft.
What does it cost to run?
About 24¢ an hour on high at about 17¢ per kWh.
Can I use the flame without heat?
Yes. The flame and brick backdrop work without the heater on.


Reviews
There are no reviews yet.