Overview
This 23-inch infrared electric fireplace insert pairs an infrared quartz heater with a traditional look: life-like resin logs set against a vintage brick-tile back wall. It plugs into a standard 120V outlet and puts out 1,500 W, the most heat of our 23-inch inserts.
Pick this one if you want your fireplace to look like a brick firebox even with the flame off. For a thinner insert without the brick back, see our 23″ log set insert, or browse all our electric fireplace inserts.
Why you’ll like it
- Brick-tile back wall and resin logs. Looks like a real firebox with the flame on or off.
- Infrared quartz heat. The manufacturer says it helps keep the room’s natural humidity, so the air doesn’t feel as dry.
- 1,500 W output. More than our 1,400 W thin inserts.
- 3 flame brightness levels plus ember-only glow. The flame runs with or without heat.
- Touch buttons up high. The panel sits at the top right, out of reach of pets bumping into it.
Will it fit your fireplace?
It’s a 23-inch insert for TV stands and fireplace cabinets made around that size. The insert measures 24 x 8.2 x 18.3 in (W x D x H). It’s deeper than our thin inserts, so check your opening’s depth. The manual shows at least 1 inch of space around the body, with 1.5 inches on the top or on one side.
Measure your opening’s width, height and depth at the narrowest points and allow for the cord to reach the outlet. Our guide on how to measure for an electric fireplace insert explains how, and we’re happy to check your numbers before you order.
Heat and running cost
On high the heater draws 1,500 W, about 5,118 BTU per hour (often rounded to 5,000 BTU), rated for supplemental heat up to 400 sq ft. At about 17¢ per kWh, that’s roughly 26¢ an hour. No low-heat wattage is listed, so we can’t quote a low-setting cost.
Flame-only mode runs just the LED flame with the heater off. More in our guide to how much electricity an electric fireplace uses.
Controls and features
Use the infrared remote, which works up to 19 ft away, or the touch buttons with a digital display at the top right. You get power, heat, 11 temperature settings from 64 to 82°F (plus an On setting), 3 flame brightness levels, an ember-only setting, a heater lock and a timer from 30 minutes to 6 hours. There’s no app, sound or flame-color setting.
Installation
It plugs into any standard 120V outlet with a 6 ft three-prong cord that exits at the rear, so there’s no hardwiring. Don’t use an extension cord. It’s made for TV stands, fireplace cabinets and freestanding use. In a mantel it slides in from the back and is held by the mantel’s mounting brackets, so you need access behind it and a helper. It isn’t described for use inside an open masonry fireplace; for that, our 21″ electric log insert is designed to sit on the hearth. More help in our guide on how to install an electric fireplace insert.
Specifications
| Fits opening | Furniture made for a 23-inch insert |
|---|---|
| Dimensions (W x D x H) | 24 x 8.2 x 18.3 in |
| Heater output | 1,500 W infrared quartz, about 5,118 BTU/hr |
| Heating area | Up to 400 sq ft, supplemental |
| Voltage/plug | Standard 120V outlet, 6 ft three-prong cord |
| Flame effects | Resin logs, brick-tile back wall, 3 brightness levels, ember-only glow, flame without heat |
| Controls | Infrared remote, touch buttons with digital display, 0.5 to 6 hr timer, 64 to 82°F |
| Safety features | Overheat cutoff and a fuse; the manufacturer lists CSA/UL certification |
| Material | Tempered glass, powder-coated sheet metal, plastic; antique black |
| Weight | 24.3 lb |
Good to know
- Best for: a traditional brick-and-log look in a TV stand or mantel.
- Best for: people who find space heaters dry out the air.
- Not for: very shallow consoles; the insert is 8.2 inches deep.
FAQ
What’s the difference between infrared quartz and a regular heater?
Both warm the room. The manufacturer says the infrared quartz heat helps keep the air’s natural humidity, so it feels less dry.
Does it plug into a normal outlet?
Yes, any standard 120V grounded outlet. No hardwiring needed.
Can I see the brick without the fire on?
Yes. The brick-tile back wall and resin logs are physical parts, so the insert looks like a firebox even when it’s off.
How much does it cost to run?
About 26¢ an hour on high at about 17¢ per kWh.




Reviews
There are no reviews yet.