Overview
This mid century modern fireplace TV stand is 78″ long, fits TVs up to 85″ and has a 1,400 W electric fireplace in the center. The walnut wood-grain finish, slatted sliding doors and angled tapered legs give it the clean, warm look of a 1960s credenza.
The fireplace does double duty: run the heater on cool nights, or turn it off and keep the flame going all year with 16 flame colors and 16 ember colors.
Why you’ll like it
- Sized for an 85″ TV. The 78″ top is rated for 150 lbs.
- A real mid-century look. Walnut grain, vertical slatted doors, rounded edges and tapered legs.
- Easy cleaning underneath. 5.1″ of clearance lets most robot vacuums pass under it.
- Display and hide. Open side cubbies for speakers and boxes, slatted sliding doors for the clutter.
- Lots of flame options. 16 flame colors, 16 ember colors, 5 brightness levels and adjustable flame speed.
Will it fit?
The console is 78″ wide, 15.75″ deep and 24.5″ tall. It weighs about 112 lbs assembled.
- Max TV size: 85″ (an 85″ TV is roughly 74″ wide, so it fits within the 78″ top)
- Top weight capacity: 150 lbs. Most 85″ TVs weigh well under that, but check yours
- Side cubbies: 30 lbs (upper) and 50 lbs (lower)
- Floor clearance: 5.1″
Give it a wall at least 7 feet wide so the console doesn’t look squeezed. More big-screen options live in our fireplace TV stands for 75″+ TVs.
Heat and running cost
The built-in heater is 1,400 W, about 4,777 BTU. At about 17¢ per kWh that’s about 24¢ an hour on high, roughly $1.90 for an 8-hour evening. It’s sold as supplemental zone heat with no rated square-foot area, so think of it as warmth for the seating area, not the whole house.
It runs on a standard 120 V grounded outlet. Plug it straight into the wall, not an extension cord or power strip. There are 11 temperature settings from 64 to 82°F, and a flame-only mode for summer.
Controls and features
- Front touch control panel with a digital LED display
- Remote for power, heat, flame color, brightness, timer and flame speed (2 AAA batteries, not included)
- 11 thermostat settings, 64 to 82°F
- 16 flame colors, 16 ember-bed colors, 5 brightness levels, adjustable flame speed
- Auto-off timer up to 9 hours
What’s in the box and assembly
It ships in two boxes: the console and the fireplace insert. The console goes together in 24 illustrated steps, the instructions call for two people, and an anti-tip strap is included to fix it to a wall stud. The insert box holds the fireplace, glass panel, acrylic crystals, remote, manual, brackets and screws. Fitting the insert takes about 5 to 15 minutes.
Specifications
| Dimensions (W x D x H) | 78 x 15.75 x 24.5 in |
|---|---|
| Weight | About 112 lb |
| Max TV size | 85″ (top rated for 150 lbs) |
| Heater output | 1,400 W (about 4,777 BTU), 120 V plug-in |
| Flame effects | 16 flame colors, 16 ember colors, 5 brightness levels, adjustable speed |
| Controls | Touch panel, remote, 64 to 82°F thermostat, 9 hr timer |
| Material | MDF, tempered glass, stainless steel |
| Finish | Walnut wood grain |
Good to know
- Best for mid-century, Scandinavian or warm-modern rooms with a 75″ to 85″ TV.
- Great if you own a robot vacuum and hate dust under furniture.
- Pick a taller cabinet with more closed storage if you have a lot of media gear to hide.
- If your TV is heavier than 150 lbs, look elsewhere or wall-mount the TV.
FAQ
Can I run the flame without heat?
Yes. The flame works on its own, so you can enjoy it in July.
Will the heat damage my TV?
The manufacturer describes it as zone heat for the room. Read our guide to TVs and fireplace heat for practical tips.
Does the remote need batteries?
Yes, 2 AAA batteries, which aren’t included. The remote works from up to about 19 feet away.
Is it real walnut?
It’s a walnut wood-grain finish over MDF, with tempered glass and stainless steel parts.


Reviews
There are no reviews yet.